Send Message
China Scuba Diving Scooter manufacturer

CE Lightweight Scuba Diving Regulator First Stage Plated Brass Material

Product Details:
Place of Origin: China
Brand Name: ZTDIVE
Certification: CE,FCC, PSE
Model Number: ZT-105
Payment & Shipping Terms:
Price: MSRP:USD430
Packaging Details: Cartons
Payment Terms: T/T

Detail Information

Ports: Four Medium Pressure Ports, Two High Pressure Ports Type: DIN/INT
Material: Chrome Plated Brass Weight: 750g/DIN
Relative Medium Voltage: 0.9±0.1mpa Use: Scuba Diving
High Light:

CE Scuba Diving Regulator

,

Lightweight Scuba Diving Regulator

,

Brass First Stage Scuba Regulator

Product Description

ZT105 The First Head Of The Diving Regulator Silver Brass Plated Cautery Material

 

 

Descriptions

 

•Made of brass and chrome plated, the balanced diaphragm provides a steady flow of sufficient air irrespective of depth, bottle pressure and respiration rate

•EN250/2016 standard

 

Specifications

Ports 4 medium voltage ports 3/8 " to 24UNF, 2 high voltage ports 7/16" to 20UNF/rotating medium voltage ports
Relative medium pressure 0.9±0.1mpa
Model Balanced diaphragm type
Type DIN/INT is optional
Average output flow ≥1000 L/min
Weight 750 g /DIN

 

 

warning

 

(1) Do not assemble the low pressure tube on the high pressure hole of the first level unloader (with HP), nor connect the high pressure tube to the low pressure outlet of the first level unloader.

(2) The two-stage compressor is the medium-pressure air from the low-pressure outlet of the first-stage compressor, and the pressure is 0.95± 0.05mpa.

Select the high pressure pipe and medium pressure pipe to connect the hole.

Turn the high pressure plug and low pressure plug counterclockwise using a hex wrench.

Reserve these high and low pressure plugs for future use.

Base some lubricating oil to end thread of tube and o-ring (silicone oil may also be used, but silicone oil equipment should not be used on high oxygen diving).

Turn the pressure pipe clockwise to the corresponding outlet and use the torque tool to tighten the torque value. The torque value of the tool should be 40in-lbs.

 

Regulator First stages ZT105

CE Lightweight Scuba Diving Regulator First Stage Plated Brass Material 0CE Lightweight Scuba Diving Regulator First Stage Plated Brass Material 1CE Lightweight Scuba Diving Regulator First Stage Plated Brass Material 2

CE Lightweight Scuba Diving Regulator First Stage Plated Brass Material 3

Get in touch with us

Enter Your Message

You Might Be Into These